: Edexcel past-paper questions pack
Back to the topic page

Motion in a circle: horizontal and vertical

Past-paper questions pack

Name
Class
Date set
Date due
Score/ 221

Questions are numbered; the mark schemes (the answer key) follow on separate pages so the question pages can be handed out alone. www.alevelfurthermathstutor.com

Edexcel AS and A-level Further Maths past-paper questions since June 2018 · 52 parts, 221 marks · mark schemes follow the questions · www.alevelfurthermathstutor.com · Questions and mark schemes © Pearson Education Ltd

1. June 2025 · AS Paper 2 (Further Mechanics 2) · Q4(a) · 5 marks
4. A car is travelling round a circular track. The car moves with constant speed in a horizontal circle of radius r. In an initial model, • the car and driver are modelled as a single particle • the track is modelled as being rough, so that there is sideways friction between the tyres of the car and the track with coefficient of friction μ • the track is modelled as being horizontal Using this model, the maximum speed at which the car can move round the circle of radius r without slipping sideways is 1 gr. (a) Show that μ O 1 (5)
2. June 2025 · AS Paper 2 (Further Mechanics 2) · Q4(b) · 7 marks
In a refined model, • the car and driver are modelled as a single particle • the track is modelled as being rough, so that there is sideways friction between the tyres of the car and the track with coefficient of friction 1 • the track is modelled as being banked at an angle theta to the horizontal Using this model, the minimum speed at which the car can move round the circle rg of radius r without slipping sideways is (b) Find the value of tan theta (7)
3. June 2025 · Paper 4C (Further Mechanics 2) · Q3 · 7 marks
3. A 0.6 m P 0.8 m 0.6 m B Figure 4 A particle P of mass 0.2 kg is attached to one end of a light inextensible string of length 0.6 m. The other end of the string is attached to the fixed point A. A second light inextensible string of length 0.6 m has one end attached to P and the other end attached to the fixed point B. The point B is vertically below A such that AB = 0.8 m , as shown in Figure 4. The particle moves in a horizontal circle with constant angular speed ω radians per second, with both strings taut. Given that the tension in the string from P to A is twice the tension in the string from P to B, find the value of ω . (7)
4. June 2025 · Paper 4C (Further Mechanics 2) · Q8(a) · 7 marks
–2 8. In this question use g = 10 m s 1.5 m v m s –1 theta 1.5 m P –1 6 m s P Figure 8 A particle P of mass 0.4 kg is attached to one end of a light inextensible string of length 1.5 m. The other end of the string is attached to a fixed point O. The particle is at rest vertically below O with the string taut. –1 The particle is then projected horizontally with speed 6 m s When the string has turned through an angle theta , the string is still taut and the speed of –1 , as shown in Figure 8. P is v m s (a) Show that when v = 3 2 , the tension in the string is 6.4 N. (7)
5. June 2025 · Paper 4C (Further Mechanics 2) · Q8(b) · 5 marks
(b) Find the magnitude of the acceleration of P when v = 3 (5)
6. June 2024 · AS Paper 2 (Further Mechanics 2) · Q2(a) · 6 marks
2. a h C B r Figure 2 A thin hollow hemisphere, with centre O and radius a, is fixed with its axis vertical, as shown in Figure 2. A small ball B of mass m moves in a horizontal circle on the inner surface of the hemisphere. The circle has centre C and radius r. The point C is vertically below O such that OC = h. The ball moves with constant angular speed ω The inner surface of the hemisphere is modelled as being smooth and B is modelled as a particle. Air resistance is modelled as being negligible. (a) Show that Æ 2 O g h (6)
7. June 2024 · AS Paper 2 (Further Mechanics 2) · Q2(b) · 3 marks
Given that the magnitude of the normal reaction between B and the surface of the hemisphere is 3mg (b) find ω in terms of g and a. (3)
8. June 2024 · AS Paper 2 (Further Mechanics 2) · Q2(c) · 1 marks
(c) State how, apart from ignoring air resistance, you have used the fact that B is modelled as a particle. (1)
9. June 2024 · Paper 4C (Further Mechanics 2) · Q3(a) · 6 marks
3. 10d 8d C P Figure 2 Figure 2 shows a hemispherical bowl of internal radius 10d that is fixed with its circular rim horizontal. The centre of the circular rim is at the point O. A particle P moves with constant angular speed on the smooth inner surface of the bowl. The particle P moves in a horizontal circle with radius 8d and centre C. (a) Find, in terms of g, the exact magnitude of the acceleration of P. (6)
10. June 2024 · Paper 4C (Further Mechanics 2) · Q3(b) · 3 marks
The time for P to complete one revolution is T. (b) Find T in terms of d and g. (3)
11. June 2024 · Paper 4C (Further Mechanics 2) · Q7(a) · 3 marks
7. A U B r v theta Figure 6 A smooth solid hemisphere has radius r and the centre of its plane face is O. The hemisphere is fixed with its plane face in contact with horizontal ground, as shown in Figure 6. A small stone is at the point A, the highest point on the surface of the hemisphere. The stone is projected horizontally from A with speed U. The stone is still in contact with the hemisphere at the point B, where OB makes an angle theta with the upward vertical. The speed of the stone at the instant it reaches B is v. The stone is modelled as a particle P and air resistance is modelled as being negligible. (a) Use the model to find v 2 in terms of U, r, g and theta (3)
12. June 2024 · Paper 4C (Further Mechanics 2) · Q7(b) · 5 marks
When P leaves the surface of the hemisphere, the speed of P is W. rg Given that U = (b) show that W rg = (5)
13. June 2024 · Paper 4C (Further Mechanics 2) · Q7(c) · 3 marks
After leaving the surface of the hemisphere, P moves freely under gravity until it hits the ground. (c) Find the speed of P as it hits the ground, giving your answer in terms of r and g. (3)
14. June 2024 · Paper 4C (Further Mechanics 2) · Q7(d) · 3 marks
At the instant when P hits the ground it is travelling at alpha ° to the horizontal. (d) Find the value of alpha . (3)
15. June 2023 · AS Paper 2 (Further Mechanics 2) · Q3 · 9 marks
3. A girl is cycling round a circular track. The girl and her bicycle have a combined mass of 55 kg. The coefficient of friction between the track surface and the tyres of the bicycle is μ. The track is banked at an angle of 15° to the horizontal. The girl and her bicycle are modelled as a particle moving in a horizontal circle of radius 50 m The minimum speed at which the girl can cycle round this circle without slipping is 4.5 m s–1 Using the model, find the value of μ. (9)
16. June 2023 · Paper 4C (Further Mechanics 2) · Q4(a) · 6 marks
4. R P v a theta Figure 2 A smooth hemisphere of radius a is fixed on a horizontal surface with its plane face in contact with the surface. The centre of the plane face of the hemisphere is O. A particle P of mass M is disturbed from rest at the highest point of the hemisphere. When P is still on the surface of the hemisphere and the radius from O to P is at an angle theta to the vertical, • the speed of P is v • the normal reaction between the hemisphere and the particle is R, as shown in Figure 2. (a) Show that R Mg 3 cos theta (6)
17. June 2023 · Paper 4C (Further Mechanics 2) · Q4(b) · 3 marks
(b) Find, in terms of a and g, the speed of the particle at the instant when the particle leaves the surface of the hemisphere. (3)
18. June 2023 · Paper 4C (Further Mechanics 2) · Q6 · 9 marks
6. 0.6 m 0.5 m P 0.8 m V Figure 4 A hollow right circular cone, of internal base radius 0.6 m and height 0.8 m, is fixed with its axis vertical and its vertex V pointing downwards, as shown in Figure 4. A particle P of mass m kg moves in a horizontal circle of radius 0.5 m on the rough inner surface of the cone. The particle P moves with constant angular speed ω rads31 The coefficient of friction between the particle P and the inner surface of the cone is 0.25 Find the greatest possible value of ω (9)
19. June 2022 · AS Paper 2 (Further Mechanics 2) · Q3(a) · 7 marks
3. A cyclist is travelling around a circular track which is banked at an angle alpha to the horizontal, where tan alpha = 3 The cyclist moves with constant speed in a horizontal circle of radius r. In an initial model, • the cyclist and her cycle are modelled as a particle • the track is modelled as being rough so that there is sideways friction between the tyres of the cycle and the track, with coefficient of friction μ, where μ < 4 Using this model, the maximum speed that the cyclist can travel around the track in a horizontal circle of radius r, without slipping sideways, is V. ( ) + μ rg (a) Show that V = - μ (7)
20. June 2022 · AS Paper 2 (Further Mechanics 2) · Q3(b) · 2 marks
In a new simplified model, • the cyclist and her cycle are modelled as a particle • the motion is now modelled so that there is no sideways friction between the tyres of the cycle and the track Using this new model, the speed that the cyclist can travel around the track in a horizontal circle of radius r, without slipping sideways, is U. (b) Find U in terms of r and g. (2)
21. June 2022 · AS Paper 2 (Further Mechanics 2) · Q3(c) · 2 marks
(c) Show that U < V. (2)
22. June 2022 · Paper 4C (Further Mechanics 2) · Q4(a) · 3 marks
4. B theta 6a A ω R Figure 2 A small smooth ring R of mass m is threaded onto a light inextensible string. One end of the string is attached to a fixed point A and the other end of the string is attached to the fixed point B such that B is vertically above A and AB = 6a The ring moves with constant angular speed ω in a horizontal circle with centre A. The string is taut and BR makes a constant angle theta with the downward vertical, as shown in Figure 2. The ring is modelled as a particle. Given that tan theta = 8 (a) find, in terms of m and g, the magnitude of the tension in the string, (3)
23. June 2022 · Paper 4C (Further Mechanics 2) · Q4(b) · 5 marks
(b) find ω in terms of a and g (5)
24. June 2022 · Paper 4C (Further Mechanics 2) · Q7(a) · 6 marks
7. theta a u P Figure 5 a . The other A package P of mass m is attached to one end of a string of length 2 end of the string is attached to a fixed point O. The package hangs at rest vertically below O with the string taut and is then projected horizontally with speed u, as shown in Figure 5. When OP has turned through an angle theta and the string is still taut, the tension in the string is T The package is modelled as a particle and the string as being light and inextensible. mu (a) Show that T = 3mg cos theta – 2mg + 5 a (6)
25. June 2022 · Paper 4C (Further Mechanics 2) · Q7(b) · 2 marks
Given that P moves in a complete vertical circle with centre O (b) find, in terms of a and g, the minimum possible value of u (2)
26. June 2022 · Paper 4C (Further Mechanics 2) · Q7(c) · 3 marks
Given that u = 2 ag (c) find, in terms of g, the magnitude of the acceleration of P at the instant when OP is horizontal. (3)
27. June 2022 · Paper 4C (Further Mechanics 2) · Q7(d) · 1 marks
(d) Apart from including air resistance, suggest one way in which the model could be refined to make it more realistic. (1)
28. Nov 2021 · Paper 4C (Further Mechanics 2) · Q4(a) · 2 marks
4. A l R B Figure 4 One end of a light inextensible string of length 2l is attached to a fixed point A. A small smooth ring R of mass m is threaded on the string and the other end of the string is attached to a fixed point B. The point B is vertically below A, with AB = l. The ring is then made to move with constant speed V in a horizontal circle with centre B. The string is taut and BR is horizontal, as shown in Figure 4. l (a) Show that BR = 3 (2)
29. Nov 2021 · Paper 4C (Further Mechanics 2) · Q4(b) · 4 marks
Given that air resistance is negligible, (b) find, in terms of m and g, the tension in the string, (4)
30. Nov 2021 · Paper 4C (Further Mechanics 2) · Q4(c) · 4 marks
(c) find V in terms of g and l. (4)
31. Nov 2021 · Paper 4C (Further Mechanics 2) · Q5(a) · 6 marks
5. A light inextensible string of length a has one end attached to a fixed point O. The other end of the string is attached to a small stone of mass m. The stone is held with the string taut and horizontal. The stone is then projected vertically upwards with speed U. The stone is modelled as a particle and air resistance is modelled as being negligible. Assuming that the string does not break, use the model to (a) find the least value of U so that the stone will move in complete vertical circles. (6)
32. Nov 2021 · Paper 4C (Further Mechanics 2) · Q5(b) · 6 marks
The string will break if the tension in it is equal to 11 mg Given that U = 2 ag , use the model to (b) find the total angle that the string has turned through, from when the stone is projected vertically upwards, to when the string breaks, (6)
33. Nov 2021 · Paper 4C (Further Mechanics 2) · Q5(c) · 4 marks
(c) find the magnitude of the acceleration of the stone at the instant just before the string breaks. (4)
34. Oct 2020 · AS Paper 2 (Further Mechanics 2) · Q2(a) · 2 marks
2. A a 3 P B Figure 2 One end of a string of length 3a is attached to a point A and the other end is attached to a point B on a smooth horizontal table. The point B is vertically below A with AB = a 3 A small smooth bead, P, of mass m is threaded on to the string. The bead P moves on the table in a horizontal circle, with centre B, with constant speed U. Both portions, AP and BP, of the string are taut, as shown in Figure 2. The string is modelled as being light and inextensible and the bead is modelled as a particle. (a) Show that AP = 2a (2)
35. Oct 2020 · AS Paper 2 (Further Mechanics 2) · Q2(b) · 4 marks
(b) Find, in terms of m, U and a, the tension in the string. (4)
36. Oct 2020 · AS Paper 2 (Further Mechanics 2) · Q2(c) · 5 marks
2 < ag 3 (c) Show that U (5)
37. Oct 2020 · AS Paper 2 (Further Mechanics 2) · Q2(d) · 1 marks
2 > ag 3 (d) Describe what would happen if U (1)
38. Oct 2020 · AS Paper 2 (Further Mechanics 2) · Q2(e) · 1 marks
(e) State briefly how the tension in the string would be affected if the string were not modelled as being light. (1)
39. Oct 2020 · Paper 4C (Further Mechanics 2) · Q5(a) · 7 marks
5. A 60 cm 40 cm P Figure 4 A particle P of mass 0.75 kg is attached to one end of a light inextensible string of length 60 cm. The other end of the string is attached to a fixed point A that is vertically above the point O on a smooth horizontal table, such that OA = 40 cm. The particle remains in contact with the table, with the string taut, and moves in a horizontal circle with centre O, as shown in Figure 4. The particle is moving with a constant angular speed of 3 radians per second. (a) Find (i) the tension in the string, (ii) the normal reaction between P and the table. (7)
40. Oct 2020 · Paper 4C (Further Mechanics 2) · Q5(b) · 4 marks
The angular speed of P is now gradually increased. (b) Find the angular speed of P at the instant P loses contact with the table. (4)
41. Oct 2020 · Paper 4C (Further Mechanics 2) · Q6(a) · 6 marks
6. l alpha P v Figure 5 A particle P of mass m is attached to one end of a light inextensible string of length l. The other end of the string is attached to a fixed point O. The particle is held with the string taut and OP horizontal. The particle is then projected vertically downwards with speed u, where u2 = 9 5 gl . When OP has turned through an angle alpha and the string is still taut, the speed of P is v, as shown in Figure 5. At this instant the tension in the string is T. (a) Show that T = 3mg sin alpha + 9 5 mg (6)
42. Oct 2020 · Paper 4C (Further Mechanics 2) · Q6(b) · 3 marks
(b) Find, in terms of g and l, the speed of P at the instant when the string goes slack. (3)
43. Oct 2020 · Paper 4C (Further Mechanics 2) · Q6(c) · 4 marks
(c) Find, in terms of l, the greatest vertical height reached by P above the level of O. (4)
44. June 2019 · AS Paper 2 (Further Mechanics 2) · Q3(a) · 7 marks
3. A light inextensible string has length 8a. One end of the string is attached to a fixed point A and the other end of the string is attached to a fixed point B, with A vertically 4 . A small ball of mass m is attached to a point P on the string, above B and AB a 5 . where AP a The ball moves in a horizontal circle with constant speed v, with both AP and BP taut. The string will break if the tension in it exceeds 3 mg By modelling the ball as a particle and assuming the string does not break, (a) show that 9 ag ag < - v (7)
45. June 2019 · AS Paper 2 (Further Mechanics 2) · Q3(b) · 2 marks
(b) find the least possible time needed for the ball to make one complete revolution. (2)
46. June 2019 · Paper 4C (Further Mechanics 2) · Q1 · 6 marks
1. a 4 a B Figure 1 A hemispherical shell of radius a is fixed with its rim uppermost and horizontal. A small bead, B, is moving with constant angular speed, Ȧ, in a horizontal circle on the smooth inner surface of the shell. The centre of the path of B is at a distance 1 4 a vertically below the level of the rim of the hemisphere, as shown in Figure 1. Find the magnitude of Ȧ, giving your answer in terms of a and g. (6)
47. June 2019 · Paper 4C (Further Mechanics 2) · Q7(a) · 1 marks
7. A particle, P, of mass m is attached to one end of a light rod of length L. The other end of the rod is attached to a fixed point O so that the rod is free to rotate in a vertical plane about O. The particle is held with the rod horizontal and is then projected vertically downwards with speed u. The particle first comes to instantaneous rest at the point A. (a) Explain why the acceleration of P at A is perpendicular to OA. (1)
48. June 2019 · Paper 4C (Further Mechanics 2) · Q7(b) · 6 marks
At the instant when P is at the point A the acceleration of P is in a direction making an gL angle ș with the horizontal. Given that u = , (b) find (i) the magnitude of the acceleration of P at the point A, (ii) the size of ș. (6)
49. June 2019 · Paper 4C (Further Mechanics 2) · Q7(c) · 5 marks
(c) Find, in terms of m and g, the magnitude of the tension in the rod at the instant when P is at its lowest point. (5)
50. June 2018 · AS Paper 2 (Further Mechanics 2) · Q2(a) · 7 marks
2. A car moves round a bend which is banked at a constant angle of theta ° to the horizontal. When the car is travelling at a constant speed of 80 km h-1 there is no sideways frictional force on the car. The car is modelled as a particle moving in a horizontal circle of radius 500 m. (a) Find the value of theta . (7)
51. June 2018 · AS Paper 2 (Further Mechanics 2) · Q2(b) · 1 marks
(b) Identify one limitation of this model. (1)
52. June 2018 · AS Paper 2 (Further Mechanics 2) · Q2(c) · 1 marks
The speed of the car is increased so that it is now travelling at a constant speed of 90 km h-1 The car is still modelled as a particle moving in a horizontal circle of radius 500 m. (c) Describe the extra force that will now be acting on the car, stating the direction of this force. (1)

Mark schemes

Each mark scheme shows the whole question; the parts on this topic are the ones listed above.

June 2025 · AS Paper 2 (Further Mechanics 2) · Q4
Mark scheme June 2025 Paper 2 (Further Mechanics 2) Q4(b)
June 2025 · Paper 4C (Further Mechanics 2) · Q3
Mark scheme June 2025 Paper 4C (Further Mechanics 2) Q3
June 2025 · Paper 4C (Further Mechanics 2) · Q8
Mark scheme June 2025 Paper 4C (Further Mechanics 2) Q8(b)
June 2024 · AS Paper 2 (Further Mechanics 2) · Q2
Mark scheme June 2024 Paper 2 (Further Mechanics 2) Q2(c)
June 2024 · Paper 4C (Further Mechanics 2) · Q3
Mark scheme June 2024 Paper 4C (Further Mechanics 2) Q3(b)
June 2024 · Paper 4C (Further Mechanics 2) · Q7
Mark scheme June 2024 Paper 4C (Further Mechanics 2) Q7(d)
June 2023 · AS Paper 2 (Further Mechanics 2) · Q3
Mark scheme June 2023 Paper 2 (Further Mechanics 2) Q3
June 2023 · Paper 4C (Further Mechanics 2) · Q4
Mark scheme June 2023 Paper 4C (Further Mechanics 2) Q4(b)
June 2023 · Paper 4C (Further Mechanics 2) · Q6
Mark scheme June 2023 Paper 4C (Further Mechanics 2) Q6
June 2022 · AS Paper 2 (Further Mechanics 2) · Q3
Mark scheme June 2022 Paper 2 (Further Mechanics 2) Q3(c)
June 2022 · Paper 4C (Further Mechanics 2) · Q4
Mark scheme June 2022 Paper 4C (Further Mechanics 2) Q4(b)
June 2022 · Paper 4C (Further Mechanics 2) · Q7
Mark scheme June 2022 Paper 4C (Further Mechanics 2) Q7(d)
Nov 2021 · Paper 4C (Further Mechanics 2) · Q4
Mark scheme Nov 2021 Paper 4C (Further Mechanics 2) Q4(c)
Nov 2021 · Paper 4C (Further Mechanics 2) · Q5
Mark scheme Nov 2021 Paper 4C (Further Mechanics 2) Q5(c)
Oct 2020 · AS Paper 2 (Further Mechanics 2) · Q2
Mark scheme Oct 2020 Paper 2 (Further Mechanics 2) Q2(e)
Oct 2020 · Paper 4C (Further Mechanics 2) · Q5
Mark scheme Oct 2020 Paper 4C (Further Mechanics 2) Q5(b)
Oct 2020 · Paper 4C (Further Mechanics 2) · Q6
Mark scheme Oct 2020 Paper 4C (Further Mechanics 2) Q6(c)
June 2019 · AS Paper 2 (Further Mechanics 2) · Q3
Mark scheme June 2019 Paper 2 (Further Mechanics 2) Q3(b)
June 2019 · Paper 4C (Further Mechanics 2) · Q1
Mark scheme June 2019 Paper 4C (Further Mechanics 2) Q1
June 2019 · Paper 4C (Further Mechanics 2) · Q7
Mark scheme June 2019 Paper 4C (Further Mechanics 2) Q7(c)
June 2018 · AS Paper 2 (Further Mechanics 2) · Q2
Mark scheme June 2018 Paper 2 (Further Mechanics 2) Q2(c)