Notes, worked examples and practice for this topic are being written by our tutors. The past-paper questions below are ready now: work each one on paper, then open the mark scheme and the examiner's comment.
Tap a question to zoom it. Mark scheme and examiner's comment open under each question.
June 2025 · AS Paper 1 (Core Pure) · Q5(a)2 marks
Mark scheme (whole question; this part is marked with the orange bar)
Examiner's comment
Learners found this to be a challenging question with only a minority achieving full marks. In part (a), the circle was usually drawn in the correct place although there were cases of the circle being centred on the imaginary rather than the real axis. Learners should have produced a diagram that was labelled at least with the centre as (1, 0) so that it was clear that the radius was correct.
Key points from the mark scheme and examiner's report
circle centre (1, 0) radius 1, centre labelled
centring on the imaginary axis an error
June 2025 · AS Paper 1 (Core Pure) · Q5(b)3 marks
Mark scheme (whole question; this part is marked with the orange bar)
Examiner's comment
Learners found this to be a challenging question with only a minority achieving full marks. In part (b), the more successful attempts started with a diagram clearly drawn so that the geometry of the situation could be seen. In this geometric approach, a common error was to incorrectly identify the side length of 1 to be perpendicular to the x-axis resulting the use of tangent rather than the sine and thus gained no credit. An alternative approach using the equation of the line in the form y = tan theta (x + 1), the equation of the circle as (x – 1)2 + y2 = 1 and then considering the condition for the line to be tangent to the circle was also seen and usually produced correct answers.
Key points from the mark scheme and examiner's report
half-line from −1 tangent to the circle: sin θ = 1/2 (hypotenuse 2, radius 1), θ = ±π/6
using tan instead of sin scores 0
June 2025 · AS Paper 1 (Core Pure) · Q5(c)3 marks
Mark scheme (whole question; this part is marked with the orange bar)
Examiner's comment
Learners found this to be a challenging question with only a minority achieving full marks. Part (c) proved to be the most challenging. The use of geometry resulting from a clear diagram would have made solution more straightforward but many used the equation of a tangent, often incorrectly and so failed to make progress. Very few recognised that the second solution must be the complex conjugate (again, use of a clear diagram would have helped) and solved for two values of x. A common error was to find x + 1 and think this was the real part of the complex number required.
Key points from the mark scheme and examiner's report
tangent length √3: z = −1 + √3(cos π/6 ± i sin π/6) = 1/2 ± (√3/2)i
very few spotted the conjugate second solution
June 2025 · Paper 2 (Core Pure 2) · Q4(ii)(a)2 marks
Mark scheme (whole question; this part is marked with the orange bar)
Examiner's comment
This proved a useful question for discriminating across grades with good access in part (i) for all grades but a demanding part (ii) that gave the better learners opportunity to show case their ability. Part (i) was well done overall. The majority gained the first two marks for the links between a and c and/or b and d, though there were occasional slips particularly with the used of the modulus. Some forgot to square the 5 to give , for example, while others squared 2 2 5 a b + = the 13, giving but most usually had one correct to gain the method mark. Only 2 2 169 a b + = a minority had subtraction between the terms or left an i in the equation. Proceeding from this point there were several different approaches to the problem, but most were able to manipulate their equations to find the required values by some means (the mark scheme shows the most common approaches). The non-standard nature of the simultaneous equations occasionally caused confusion with some unable to correctly solve, either giving incorrect answer or assuming a =2 in order to find the remaining values and so lost the final two marks. A few did not read the question properly and stopped when they found a. Perhaps some took a as given by a misread of the question. Those who managed to successfully find one correct value legitimately almost always gained full marks, though occasionally errors square rooting 9 occurred. Putting the b and d values in order was done well. Part (ii) was more troublesome for learners, especially (b). Most were able to sketch the loci to give two circles for (a) with the majority recognising that there was one on each axis. Relatively few had them on the negative parts of the axes. Drawing them to scale was less well done, though, and hence many failed to realise that the circles did not touch or overlap. Also, many marked the centres and radii rather than marking the x and y intercepts, so not heeding the directive of the question regarding labelling. An relatively common error was to have 17, rather than 19, for the second intercept on the larger circle. Overlapping circles were quite common, though as long as sufficient labelling was given these could still gain at least one mark, but it did mean the second mark was quite often lost. So, knowing the loci were circles was shown by the majority but scales and positions were not considered by all. For (ii)(b) learners were much less secure on how to proceed to find the answer, and as such proved to be a good discriminator. Many candidates either did not attempt the question at all or did a lot of unnecessary algebra with the 2 cartesian equations, attempting to find the intersections of the circles (rarely leading to successful solutions). Not many used the diagram they had drawn to realis that | z - w | was the distance between points on the circles, so that they were looking for closest points. Those who did were able to spot what to do, so those who had incorrect diagrams disadvantaged themselves, particularly those with crossing circles. Many were able to gain the first mark for finding the distance between the centres, albeit that they did not always proceed to show how it related to the problem in subsequent work. Those who assumed the circles touch or cross usually did no work to show it, so could not gain the next marks, though a few did at least find the maximum distance. There were a small number of cases of correct extreme values, but incorrect inequalities used, so most who were able to identify the correct method were able to score full marks. The alternative method of the line through the centres was far less common to see, but occasionally did lead to successful solution. However, this method was laborious and rarely led to full marks.
Key points from the mark scheme and examiner's report
circle centre 12 radius 7 through 5 and 19 on the real axis
circle centre 5i radius 4 through i and 9i
the circles do not intersect
June 2025 · Paper 2 (Core Pure 2) · Q4(ii)(b)3 marks
Mark scheme (whole question; this part is marked with the orange bar)
Examiner's comment
This proved a useful question for discriminating across grades with good access in part (i) for all grades but a demanding part (ii) that gave the better learners opportunity to show case their ability. Part (i) was well done overall. The majority gained the first two marks for the links between a and c and/or b and d, though there were occasional slips particularly with the used of the modulus. Some forgot to square the 5 to give , for example, while others squared 2 2 5 a b + = the 13, giving but most usually had one correct to gain the method mark. Only 2 2 169 a b + = a minority had subtraction between the terms or left an i in the equation. Proceeding from this point there were several different approaches to the problem, but most were able to manipulate their equations to find the required values by some means (the mark scheme shows the most common approaches). The non-standard nature of the simultaneous equations occasionally caused confusion with some unable to correctly solve, either giving incorrect answer or assuming a =2 in order to find the remaining values and so lost the final two marks. A few did not read the question properly and stopped when they found a. Perhaps some took a as given by a misread of the question. Those who managed to successfully find one correct value legitimately almost always gained full marks, though occasionally errors square rooting 9 occurred. Putting the b and d values in order was done well. Part (ii) was more troublesome for learners, especially (b). Most were able to sketch the loci to give two circles for (a) with the majority recognising that there was one on each axis. Relatively few had them on the negative parts of the axes. Drawing them to scale was less well done, though, and hence many failed to realise that the circles did not touch or overlap. Also, many marked the centres and radii rather than marking the x and y intercepts, so not heeding the directive of the question regarding labelling. An relatively common error was to have 17, rather than 19, for the second intercept on the larger circle. Overlapping circles were quite common, though as long as sufficient labelling was given these could still gain at least one mark, but it did mean the second mark was quite often lost. So, knowing the loci were circles was shown by the majority but scales and positions were not considered by all. For (ii)(b) learners were much less secure on how to proceed to find the answer, and as such proved to be a good discriminator. Many candidates either did not attempt the question at all or did a lot of unnecessary algebra with the 2 cartesian equations, attempting to find the intersections of the circles (rarely leading to successful solutions). Not many used the diagram they had drawn to realis that | z - w | was the distance between points on the circles, so that they were looking for closest points. Those who did were able to spot what to do, so those who had incorrect diagrams disadvantaged themselves, particularly those with crossing circles. Many were able to gain the first mark for finding the distance between the centres, albeit that they did not always proceed to show how it related to the problem in subsequent work. Those who assumed the circles touch or cross usually did no work to show it, so could not gain the next marks, though a few did at least find the maximum distance. There were a small number of cases of correct extreme values, but incorrect inequalities used, so most who were able to identify the correct method were able to score full marks. The alternative method of the line through the centres was far less common to see, but occasionally did lead to successful solution. However, this method was laborious and rarely led to full marks.
Key points from the mark scheme and examiner's report
distance between centres √(5² + 12²) = 13, then 13 ± (7 + 4): 2 ≤ modulus of z − w ≤ 24
June 2024 · AS Paper 1 (Core Pure) · Q5(a)2 marks
Mark scheme (whole question; this part is marked with the orange bar)
Examiner's comment
In part (a), the vast majority of the candidates correctly found the centre and radius of the given circle with any loss of mark being for sign errors on the centre coordinates or an incorrect radius of sqrt 10.
Key points from the mark scheme and examiner's report
centre (−5, 12) i.e. −5 + 12i, radius 10
sign errors or radius √10
June 2024 · AS Paper 1 (Core Pure) · Q5(b)1 mark
Mark scheme (whole question; this part is marked with the orange bar)
Examiner's comment
In part (b), nearly all of the cohort drew a correct circle with the inside shaded.
Key points from the mark scheme and examiner's report
circle centre in the second quadrant touching/crossing only the imaginary axis, inside shaded
June 2024 · AS Paper 1 (Core Pure) · Q5(c)3 marks
Mark scheme (whole question; this part is marked with the orange bar)
Examiner's comment
In part (c), the majority of the cohort recognised the point on the circle at which the maximum value of z occurs and thus found the correct distance of 23. Although the vast majority of candidates added the radius to the distance from the origin to the centre of the circle, some candidates found the coordinates of the required point on the circle which, although involving more work, is a perfectly acceptable method.
Key points from the mark scheme and examiner's report
max modulus = distance to centre + radius = 13 + 10 = 23
June 2024 · AS Paper 1 (Core Pure) · Q5(d)4 marks
Mark scheme (whole question; this part is marked with the orange bar)
Examiner's comment
In part (d), many of the cohort identified the need to find the area of a minor segment. Within this, a correct angle was found at the centre of the circle, from which a segment area was found. Any errors here were mainly in finding a required angle which often resulted in the loss of the two accuracy marks.
Key points from the mark scheme and examiner's report
region is the segment of the circle above y = 20
half-chord 6, angle at centre 1.287 rad (73.7°)
area = ½·10²·θ − ½·12·8 = 16.4
June 2024 · Paper 2 (Core Pure 2) · Q5(a)4 marks
Mark scheme (whole question; this part is marked with the orange bar)
Examiner's comment
(a) There were many very good, correct diagrams and almost all students identified that the two loci were a circle and a half line. A small number of candidates drew their circle centred on the imaginary axis, but the significant majority drew the correct circle in place and drew a suitable half line. By far the most common error was the angle at which the half line was drawn, with many students drawing a line with shallow gradient that intersected the circle to the right of centre, losing this mark and potentially giving a misleading diagram from which to work from in part c). diagram in part (a) often scored full marks. When marks were dropped using polar co-ordinates it was usually due to arithmetic errors when squaring their value for r or omitting the 1 2 from their integral or using sin instead of cos. Occasional attempts at integration of the Cartesian form were seen; however, this method was significantly more demanding and rarely scored any marks.
Key points from the mark scheme and examiner's report
circle centre 4 radius 4 touching the imaginary axis
half-line from O at π/3 meeting the circle left of its centre (steep angle)
shallow half-lines were the most common error
June 2024 · Paper 2 (Core Pure 2) · Q5(b)1 mark
Mark scheme (whole question; this part is marked with the orange bar)
Examiner's comment
(b) The majority of candidates shaded the appropriate region for their diagram with only a very small proportion shading above their half line, or below the real axis.
Key points from the mark scheme and examiner's report
shade inside the circle, above the real axis and below the half-line
June 2024 · Paper 2 (Core Pure 2) · Q5(c)4 marks
Mark scheme (whole question; this part is marked with the orange bar)
Examiner's comment
(c) There was increased challenge here, with several potential routes to finding the required area. Most candidates attempted this part, though success was notably mixed. Candidates with the correct diagram generally went on to score well. Some got confused by which parts to subtract/add to each other. Many started to work with a semicircle and then switched to a full circle when attempting to find the areas of the relevant sectors or segments. Some successfully found both coordinates of the point of intersection, gaining the first two marks, but had no overall strategy for the required area. Those who used the geometrical approach had less work to do, especially if they realised the triangle formed by the intersection point, the origin and the circle centre was equilateral. A successful approach was to use polar coordinates, where candidates with an incorrect diagram in part (a) often scored full marks. When marks were dropped using polar co-ordinates
Key points from the mark scheme and examiner's report
intersection 2 + 2√3i
area = sector of angle 2π/3 at the centre (16π/3) + triangle O, centre, intersection (4√3) = 16π/3 + 4√3
spotting the equilateral triangle O, centre, intersection helps
polar ½∫64cos²θ dθ from 0 to π/3 also works
many had no overall strategy
June 2023 · Paper 1 (Core Pure 1) · Q3(c)4 marks
Mark scheme (whole question; this part is marked with the orange bar)
Examiner's comment
In part (c), around one third of candidates scored full marks. Axes were sometimes poorly drawn and in some cases z1 and z2 appeared to be equidistant from O or z2 was wrongly positioned within the 𝑧1 quadrant. Of those who did not give the required forms in part (b), some also positioned 𝑧2 in an
Key points from the mark scheme and examiner's report
z₁ in the 2nd quadrant on y = −x, z₂ in the 3rd quadrant closer to O, z₁/z₂ in the 3rd quadrant
region is the side of the perpendicular bisector of z₁z₂ containing z₁
poorly drawn axes and z₁, z₂ shown equidistant from O
June 2023 · AS Paper 1 (Core Pure) · Q7(i)3 marks
Mark scheme (whole question; this part is marked with the orange bar)
Examiner's comment
In part (a), the first part of this question was well done overall, with the best solutions coming from candidates who drew a scale drawing of the perpendicular bisector required. It was necessary for equal scales on both axes to ensure that the y-intercept was negative. Quite a few went to the trouble of calculating the exact equation of the line and then drew it correctly, not required for the marks in this case. Shading the correct side of the line caused a few more difficulties with some not knowing how to decide which side to shade. Occasionally the shading was bounded which cost them the final mark. In part (b), using the argument to find the gradient of each line proved quite challenging for some in this part of the question. If the correct Cartesian equations of both lines were found, then a correct solution for w usually followed. M0A0A0M1M1A0 was a fairly common mark trait as the demand of the final Ms was simply simultaneously equating their two lines and solving to reach w. Some very good diagrams allowed some candidates to use basic trigonometry to reach the correct complex number from a very neat geometric approach, although this was not seen often it was usually correct providing the real length had been dealt with correctly. It is clear that not all students have a sound enough understanding of what the argument of a complex number actually represents.
Key points from the mark scheme and examiner's report
perpendicular bisector of 3 and −6i: negative gradient, negative y-intercept
shade the unbounded side containing 3
equal scales help
June 2023 · AS Paper 1 (Core Pure) · Q7(ii)6 marks
Mark scheme (whole question; this part is marked with the orange bar)
Examiner's comment
In part (a), the first part of this question was well done overall, with the best solutions coming from candidates who drew a scale drawing of the perpendicular bisector required. It was necessary for equal scales on both axes to ensure that the y-intercept was negative. Quite a few went to the trouble of calculating the exact equation of the line and then drew it correctly, not required for the marks in this case. Shading the correct side of the line caused a few more difficulties with some not knowing how to decide which side to shade. Occasionally the shading was bounded which cost them the final mark. In part (b), using the argument to find the gradient of each line proved quite challenging for some in this part of the question. If the correct Cartesian equations of both lines were found, then a correct solution for w usually followed. M0A0A0M1M1A0 was a fairly common mark trait as the demand of the final Ms was simply simultaneously equating their two lines and solving to reach w. Some very good diagrams allowed some candidates to use basic trigonometry to reach the correct complex number from a very neat geometric approach, although this was not seen often it was usually correct providing the real length had been dealt with correctly. It is clear that not all students have a sound enough understanding of what the argument of a complex number actually represents.
Key points from the mark scheme and examiner's report
half-lines y = √3(x − 2) and y = (√3/3)(x + 1)
solve: w = 7/2 + (3√3/2)i
answer as a coordinate scores A0
June 2022 · AS Paper 1 (Core Pure) · Q2(b)3 marks
Mark scheme (whole question; this part is marked with the orange bar)
Examiner's comment
Both parts (a) and (b) of this question proved to be very accessible to the vast majority of candidates, but the geometrical aspects of (c) caused significant problems for a similar majority who were unable to go on and score any marks at the end of this early question in the paper. In (b), w was generally in the correct position, although some candidates would be well advised to pay more attention to the relative location of where points should be placed on diagrams. Similarly, the half line was generally well placed on the negative part of the imaginary axis with a positive gradient, but again, more attention needed to be paid as to whether the half line would pass above w or below it.
Key points from the mark scheme and examiner's report
w in the fourth quadrant
half-line from −10i with positive gradient (angle π/3), passing between O and w
June 2022 · AS Paper 1 (Core Pure) · Q2(c)3 marks
Mark scheme (whole question; this part is marked with the orange bar)
Examiner's comment
In (c), the majority of candidates that were successful identified that the line Ow met the half- line at a right angled and proceeded to attempt to use coordinate geometry techniques to solve simultaneous equations and then find the distance between w and this intersection point. The most significant problem encountered with this strategy was inaccurate use of gradients, which arose due to the use of trigonometry to find them. Candidates who had problems here generally scored M0M1A0, but some did have multiple attempts and eventually found the correct gradients and produced a correct solution. It was far less common to see more direct attempts using the main scheme, with many who tried this failing to identify the correct triangle to use or drawing multiple diagrams to no avail. That said, there were some excellent and concise solutions.
Key points from the mark scheme and examiner's report
OW is perpendicular to the half-line: OX = 10 sin(π/6) = 5, WX = 8 − 5 = 3
coordinate-geometry route prone to wrong gradients
June 2022 · Paper 2 (Core Pure 2) · Q4(ii)3 marks
Mark scheme (whole question; this part is marked with the orange bar)
Examiner's comment
This complex number question saw a mixed response with part (b) proving fairly discriminating in particular. Most knew the sensible way forward in part (a) with the wide variety of viable alternatives rarely seen. However, having converted to a + ib form and adding, many students did not show their method to obtain the modulus and/or the argument, this is a show question. In part (b), students who produced a reasonable sketch usually went on to score all the marks. Most sketches seen were realistic with the half-line in the correct place. It was anticipated that simple right-angled trigonometry or Pythagoras would be the most likely ways forward from here. Most who opted for this were successful. Algebraic approaches were more mixed in quality. Those who chose to find the distance of the point of intersection of the two relevant lines to the origin were often correct but those embarking on a circuitous route requiring minimisation tended to fall short.
Key points from the mark scheme and examiner's report
sketch the half-line from 5 at angle 2π/3
least modulus of z is the perpendicular distance 5 sin(π/3) = 5√3/2
minimisation of x² + y² routes tended to fail
Nov 2021 · Paper 2 (Core Pure 2) · Q8(ii)(a)2 marks
Mark scheme (whole question; this part is marked with the orange bar)
Examiner's comment
Part (i) Most candidates were able to correctly find the modulus and argument of 6 + 6i and a majority also realised that the angle at the center of a regular pentagon is 2 . They then either added or subtracted multiples 5 of 2 to their original argument to obtain the required arguments. Having 5 done this successfully a few candidates failed to give their final answer in the correct format. (ii) Part (a) Quite well done on the whole. Candidates recognised that a circle with centre on the y axis and passes through the origin but some candidates failed to indicate that the radius of the circle was 2. Candidates are reminded to indicate key coordinates on graphs. (ii) Part (b) This was well done by the majority of candidates by expressing the circle as a polar equation and finding the required area 4sin r between and . 4 3
Key points from the mark scheme and examiner's report
circle centre 2i radius 2 through the origin, and the sector between half-lines at π/4 and π/3 from O
shade the overlap
label key values such as the radius
Nov 2021 · Paper 2 (Core Pure 2) · Q8(ii)(b)4 marks
Mark scheme (whole question; this part is marked with the orange bar)
Examiner's comment
Part (i) Most candidates were able to correctly find the modulus and argument of 6 + 6i and a majority also realised that the angle at the center of a regular pentagon is 2 . They then either added or subtracted multiples 5 of 2 to their original argument to obtain the required arguments. Having 5 done this successfully a few candidates failed to give their final answer in the correct format. (ii) Part (a) Quite well done on the whole. Candidates recognised that a circle with centre on the y axis and passes through the origin but some candidates failed to indicate that the radius of the circle was 2. Candidates are reminded to indicate key coordinates on graphs. (ii) Part (b) This was well done by the majority of candidates by expressing the circle as a polar equation and finding the required area 4sin r between and . 4 3
Key points from the mark scheme and examiner's report
circle in polar form r = 4sin θ
area = ½∫ 16sin²θ dθ from π/4 to π/3 = π/3 − √3 + 2
geometric route with segments and triangles also accepted
Oct 2020 · AS Paper 1 (Core Pure) · Q107 marks
Mark scheme (whole question; this part is marked with the orange bar)
Examiner's comment
There were only a couple of fully correct responses to this question. Many candidates achieved the first 3 marks for find the equation of each loci and attempt to solve simultaneously. Many then failed to use the discriminant or rearranging for x2 and setting > 0 many just tried to solve the quadratic in terms of r. Only a small minority realised to find the upper limit of r, though those that did all where success. Candidates that did pick up the second method mark, regardless of which method used, nearly always went on to achieve the accuracy for one correct limit, those that didn't used 3 3 2 2 2 2 r
Key points from the mark scheme and examiner's report
circle (x − 3)² + (y − 5)² = 4r² and half-line y = −x + 2 (x < 2)
two intersections: discriminant > 0 gives r > 3√2/2
upper limit when circle passes through (2, 0): r < √26/2
very few fully correct, most missed the upper limit
Oct 2020 · Paper 2 (Core Pure 2) · Q2(a)3 marks
Mark scheme (whole question; this part is marked with the orange bar)
Examiner's comment
Part (a) many candidates scored fully mark but there was a large proportion who found the length of the diameter and used this as the radius. A few candidates where unable to find the correct centre or did not give the answer in the form required.
Key points from the mark scheme and examiner's report
centre is the midpoint 1 − i
radius 5 (half the diameter √100, using the diameter as radius is the commonest error)
modulus of z − 1 + i = 5 in the required form
Oct 2020 · Paper 2 (Core Pure 2) · Q2(b)6 marks
Mark scheme (whole question; this part is marked with the orange bar)
Examiner's comment
Part (b) very few candidates scored full marks on this part. After writing down the Cartesian equations of each circle many stopped there. Those that did subtract to find the equation of the line of intersection many then did not know what to do next. Candidates who did precede to then eliminate either x and y from a circle equation went of to find the coordinates required.
Key points from the mark scheme and examiner's report
Cartesian equations of both circles, subtract to get 2x + 8y = 32, substitute: 17y² − 118y + 201 = 0
z = 4 + 3i and 4/17 + (67/17)i
many stopped after writing the Cartesian equations
June 2019 · AS Paper 1 (Core Pure) · Q5(d)2 marks
Mark scheme (whole question; this part is marked with the orange bar)
Key points from the mark scheme and examiner's report
perpendicular bisector of −2 and 1 + i: line through z₂ with negative gradient crossing the negative imaginary axis
shade the side containing z₁ (below/left)
June 2018 · AS Paper 1 (Core Pure) · Q3(a)5 marks
Mark scheme (whole question; this part is marked with the orange bar)
Examiner's comment
(a) The majority of students were able to produce a meaningful diagram with nearly all managing a circle with centre 1 + i The vertex of the “V” shape varied in position, some had it at the origin and also at various other positions. For those who did have a “V” shape, the directions of the branches also varied, with some pointing both to the left or right. Most students realised that the left hand branch crossed the y-axis below the circle although many had the left branch and the circle intersecting at the same point on the y-axis. Irrespective of success with the circle and “V” shape, students almost always knew that they had to shade the area between the “V” and within the circle and so could at least recover a mark following an incorrect diagram.
Key points from the mark scheme and examiner's report
circle centre 1 + i radius 3 and two half-lines from 2 at π/4 and 3π/4 above the real axis
shade inside both
vertex at the origin or branches below the axis were common errors
June 2018 · AS Paper 1 (Core Pure) · Q3(b)4 marks
Mark scheme (whole question; this part is marked with the orange bar)
Examiner's comment
(b) Proved much more challenging and many students did not know where to start. Those that were able to give the equation of the circle and equation of a half line gained the method marks by attempting to solve simultaneous equations and using the solutions correctly. Some students tried to work with the diagram and find the point of intersection by simple trigonometry but often made false assumptions when doing so. A few considered the triangle with vertices at (2, 0), the centre of the circle and the point of intersection, correctly calculating the sides as sqrt 2 , 3 and sqrt 7. They were then able to get the point of intersection from trigonometry. A few students left their answer as a decimal rather than a surd.
Key points from the mark scheme and examiner's report
solve (x − 1)² + (y − 1)² = 9 with y = x − 2
x = 2 + √14/2, y = √14/2
modulus squared = 11 + 2√14
many did not know where to start
Find an Edexcel Further Maths tutor
Stuck on this? Book a trial lesson with our Further Maths tutor.