June 2025 · Paper 3C (Further Mechanics 1) · Q36 marks
Mark scheme (whole question; this part is marked with the orange bar)
Examiner's comment
In this question, it was common for learners to work with column vectors to first find an expression for the change in momentum and then apply Pythagoras to the components to form a quadratic equation in λ . Most chose to use their calculator to solve the quadratic equation, efficiently finding two values for λ . There were many solutions with poor vector work and unconventional notation. Learners confused scalars and vectors, forming structurally incorrect equations such as m m = - I v u or . m m = - I v u Due to the format of this question, many were able to make a full recovery but learners should take greater care when solving problems with impulse expressed as a vector. It was rare for learners to use a vector triangle and the cosine rule to answer this question, but when seen it was usually correct. Sign errors or not using the mass in one or both of the terms caused marks to not be awarded. Those who tried to convert velocity vectors into a speed and direction made very little progress at all.
Key points from the mark scheme and examiner's report
mixing scalars and vectors (I = mv − mu with magnitudes) common
June 2024 · Paper 3C (Further Mechanics 1) · Q1(b)3 marks
Mark scheme (whole question; this part is marked with the orange bar)
Examiner's comment
The vast majority chose to use column vectors in parts (b) and (c) with great success. Column vectors are always acceptable throughout working but candidates are advised to double check the required format of the final answer. In this question, candidates were asked to give their final answers to parts (b) and (c) in terms of i and j and those who forgot or ignored the instruction, lost one mark.
Key points from the mark scheme and examiner's report
impulse on A = 3((−2i + (2/3)j) − (3i − j)) = −15i + 5j N s
answer must be in i, j form
June 2024 · Paper 3C (Further Mechanics 1) · Q1(c)3 marks
Mark scheme (whole question; this part is marked with the orange bar)
Examiner's comment
The vast majority chose to use column vectors in parts (b) and (c) with great success. Column vectors are always acceptable throughout working but candidates are advised to double check the required format of the final answer. In this question, candidates were asked to give their final answers to parts (b) and (c) in terms of i and j and those who forgot or ignored the instruction, lost one mark.
Key points from the mark scheme and examiner's report
impulse on B is +15i − 5j (or CLM): v_B = 1.5i − 0.5j m s⁻¹
give answer in terms of i and j
June 2023 · Paper 3C (Further Mechanics 1) · Q1(a)4 marks
Mark scheme (whole question; this part is marked with the orange bar)
Examiner's comment
all grades gaining full marks. In part (a), almost all candidates achieved the first 2 marks for a correct impulse-momentum equation. Although most continued to find the speed, a significant proportion of candidates at all levels failed to calculate the magnitude of their velocity, instead moving directly onto part (b). The vast majority of candidates scored both marks in part (b)
Key points from the mark scheme and examiner's report
June 2023 · Paper 3C (Further Mechanics 1) · Q1(b)2 marks
Mark scheme (whole question; this part is marked with the orange bar)
Examiner's comment
moving directly onto part (b). The vast majority of candidates scored both marks in part (b) with the most common approach using the scalar product. The inverse tan alternative was also popular and well-executed. Where there were errors in part (b), they generally arose from a poor choice of vectors, incorrectly using the impulse vector instead of both velocity vectors.
Key points from the mark scheme and examiner's report
scalar product of −4i + 3j and −7i + 24j: α = 36.9 (37)
using the impulse vector instead of the two velocities was the usual error
tan⁻¹(3/4) alone scores 0
June 2023 · Paper 3C (Further Mechanics 1) · Q6(a)5 marks
Mark scheme (whole question; this part is marked with the orange bar)
Examiner's comment
There were four parts to this question with parts (a), (b) and (c) all having given answers. Unfortunately, many candidates abandoned attempts at (d) or left it completely blank. Part (a) had at least four possible approaches and the presentation from candidates as they attempted to combine different pathways to reach the given answer was often poor. To make any progress, candidates needed to recognise that the angle between the final velocity and the slope was also alpha . Those who introduced a new angle rarely progressed to the given answer. The most common correct response was the main scheme followed by the vector alternative 3 approach. Some candidates took longer to reach the answer by introducing e but the intermediary result, 2 tan e = , gave them an advantage in part (d).
Key points from the mark scheme and examiner's report
final velocity also makes angle α with the plane
component along the plane conserved: u sin α = v cos α
impulse perpendicular to plane m(v sin α + u cos α) = mu sec α
a new angle rarely led anywhere
June 2022 · Paper 3C (Further Mechanics 1) · Q35 marks
Mark scheme (whole question; this part is marked with the orange bar)
Examiner's comment
This question was accessible to most candidates and many fully correct solutions were seen. The candidates understood that the problem was two-dimensional and made an attempt to resolve either the velocity or the impulse with the former being the most popular and successful method seen. It was common for candidates to work in vector form throughout and this provided a very concise approach. There was occasional confusion between sine and cosine in the components. The cosine rule method was rarely used and candidates who attempted this tended to be less successful, often starting with an incorrect triangle, either dimensionally incorrect or with the vectors combined incorrectly.
Key points from the mark scheme and examiner's report
resolve: 3cos α = ½(vx − 2.8), 3sin α = ½vy: v = (32/5, 24/5), speed 8 m s⁻¹
vector form concise
cosine-rule triangles often set up wrongly
Nov 2021 · Paper 3C (Further Mechanics 1) · Q48 marks
Mark scheme (whole question; this part is marked with the orange bar)
Examiner's comment
The candidates approached this question with confidence and several gained full marks. The method was generally well understood and most errors in finding the value of λ were due to slips in the arithmetic or algebra. Some candidates used the impulse and a velocity rather than the two velocities in their attempt to find the value of . theta
Key points from the mark scheme and examiner's report
some used the impulse rather than the two velocities for θ
Nov 2021 · Paper 3C (Further Mechanics 1) · Q7(b)3 marks
Mark scheme (whole question; this part is marked with the orange bar)
Examiner's comment
(b) Many candidates used the given result from part (a) to score full marks for finding the magnitude of the impulse.
Key points from the mark scheme and examiner's report
I = 0.25((4i + 6j) − (8i + 2j)) = −i + j
magnitude √2 = 1.41 N s
Oct 2020 · Paper 3C (Further Mechanics 1) · Q1(a)4 marks
Mark scheme (whole question; this part is marked with the orange bar)
Examiner's comment
(a) The majority of candidates recognised the need to form an impulse-momentum equation, and many did succeed in finding the magnitude of the impulse correctly. Some candidates found a correct expression for the impulse but did not go on to find the magnitude. There were some slips in the arithmetic and a significant minority of candidates used speeds rather than velocities in their attempt to find the impulse.
Key points from the mark scheme and examiner's report
J = 0.5((−i + 6j) − (4i + 3j)) = 0.5(−5i + 3j)
magnitude √34/2 = 2.92 N s
some stopped at the vector or used speeds instead of velocities
Oct 2020 · Paper 3C (Further Mechanics 1) · Q1(b)3 marks
Mark scheme (whole question; this part is marked with the orange bar)
Examiner's comment
(b) The simplest way to find the required angle was to use the scalar product, but several candidates had success using alternative methods. Most errors were due to finding the angle between the wrong pair of vectors.
Key points from the mark scheme and examiner's report
scalar product of J (or −5i + 3j) with 4i + 3j: α = 112
most errors used the wrong pair of vectors
Oct 2020 · Paper 3C (Further Mechanics 1) · Q4(a)4 marks
Mark scheme (whole question; this part is marked with the orange bar)
Examiner's comment
(a) There are several ways to tackle this question, some more succinct than others. The simplest approach is to find the impulse acting on the ball and then form the scalar product with 2 3 + i j to show that the impulse is perpendicular to 2 3 . + i j Several candidates spent time and effort trying to find angles and components of the initial and final velocity; some of these methods were successful.
Key points from the mark scheme and examiner's report
impulse 0.5(−6i + 4j) is perpendicular to the wall
(−3i + 2j).(2i + 3j) = 0 so AB parallel to 2i + 3j
or equal velocity components parallel to 2i + 3j
working with decimal angles loses the final mark
June 2019 · Paper 3C (Further Mechanics 1) · Q39 marks
Mark scheme (whole question; this part is marked with the orange bar)
Examiner's comment
The unstructured nature of this question proved quite challenging for many candidates. Most could make a start and get some credit by forming an impulse-momentum equation, but this equation was often a mixture of scalars and vectors and led nowhere. Some candidates wrote equations in which they confused impulses and velocities. A significant number of candidates did make the key step of realising that if the path of P had been deflected through an angle of 45 then the velocity must be parallel to i or parallel to j. Without this, some candidates did succeed in using a scalar product approach, although this sometimes resulted in complicated algebra with no conclusion. Of those candidates who successfully found a set of values for and , many only got two pairs - either by symmetry or by considering the positive and negative square root - and a few of those who found all four erroneously excluded those with two negative components as not valid. A small number of successful candidates used quite creative approaches including short intuitive insights to derive the four pairs from simple initial equations.
Key points from the mark scheme and examiner's report
key step: after a 45° deflection the velocity is parallel to i or j
I = m(v − u) as a vector then Pythagoras: 4a² − 16a + 7 = 0
four pairs (±3/2, −2) and (−2, ±3/2)
mixing scalars and vectors common
June 2019 · Paper 3C (Further Mechanics 1) · Q6(b)2 marks
Mark scheme (whole question; this part is marked with the orange bar)
Examiner's comment
(b) Those candidates who worked with the velocities in vector form usually obtained the correct value for the magnitude of the impulse. The most common errors were due to working with speeds, or not giving the final answer as a positive number.
Key points from the mark scheme and examiner's report
impulse along the line of centres only: 0.2(11/3 + 3) = 4/3 N s
errors from working with speeds or giving a negative magnitude
Find an Edexcel Further Maths tutor
Stuck on this? Book a trial lesson with our Further Maths tutor.