FM2.2.2 Centre of mass of uniform plane figures, and of composite plane…

Section
FM2.2 Centres of mass of plane figures
Level
AS & A level
Statement
Centre of mass of uniform plane figures, and of composite plane figures. Centre of mass of frameworks. Equilibrium of a plane lamina or framework under the action of coplanar forces.
Guidance
The use of an axis of symmetry will be acceptable where appropriate. Use of integration is not required. Questions may involve non-uniform composite plane figures/frameworks. Figures may include the shapes referred to in the formulae book. Unless otherwise stated in the question, results given in the formulae book may be quoted without proof.
Since 2018
53 parts, 193 marks · topic pages: Centres of mass of plane figures

Back to the checklist

June 2025 · AS Paper 2 (Further Mechanics 2) · Q1(a) 5 marks
1. C E 4a 3a A M B 3a Figure 1 A uniform plane lamina, shown shaded in Figure 1, is formed by removing an isosceles triangle ABE from a rectangle ABCD. • The midpoint of AB is M • AB = 3a • AD = 4a • EM = 3a • AE = EB (a) Show that the distance of the centre of mass of the lamina from AB is 13 a (5)
June 2025 · AS Paper 2 (Further Mechanics 2) · Q1(b) 3 marks
The lamina is suspended by a string attached to the lamina at D. The lamina hangs freely in equilibrium. (b) Find, to the nearest degree, the angle between AD and the vertical. (3)
June 2025 · AS Paper 2 (Further Mechanics 2) · Q3(a) 2 marks
3. [In this question you may quote, without proof, the formula for the distance of the centre of mass of a circular arc from its centre.] A 1.5a B 2a C Figure 2 Uniform wire is used to form the rigid framework shown in Figure 2. The framework consists of four straight pieces of wire, AB, BC, BD and AD and one piece in the shape of an arc of a circle, CD. In the framework • AB = 1.5a and BC = BD = 2a • CD is an arc of a circle of radius 2a and centre B • ABC is a straight line and ABD is a right angle • A B C , , and all lie in the same plane (a) Show that the distance of the centre of mass of arc CD from AC is 4a ϖ (2)
June 2025 · AS Paper 2 (Further Mechanics 2) · Q3(b) 4 marks
a (b) Show that the distance of the centre of mass of the framework from AC is 2 8 ( 1 ϖ ) (4)
June 2025 · AS Paper 2 (Further Mechanics 2) · Q3(c) 3 marks
The framework is freely pivoted at A. The framework is held in equilibrium, with BD horizontal, by an upward vertical force that is applied to the framework at D. The mass of the framework is M. The magnitude of the force exerted on the framework by the pivot at A is kMg. (c) Find the value of k giving your answer in terms of pi in its simplest form. (3)
June 2025 · Paper 4C (Further Mechanics 2) · Q1(a) 4 marks
1. A 2a 2a E B C 2a Figure 1 A uniform rod is cut into six pieces. The pieces are used to form the framework ABCDE shown in Figure 1. • All the pieces of the framework lie in the same plane. • AB = BC = CD = 2a • AE = EC = ED = 2 a • Point E is the midpoint of AC • Angle ABC = angle BCD = 90° The distance of the centre of mass of the framework from AB is d (a) Show that d = 12 + 7 2 a + 6 2 (4)
June 2025 · Paper 4C (Further Mechanics 2) · Q1(b) 3 marks
The mass of the framework is M. A particle of mass kM is attached to the framework at B The distance of the centre of mass of the loaded framework from AB is a (b) Find the value of k (3)
June 2025 · Paper 4C (Further Mechanics 2) · Q4(a) 5 marks
4. 6a B 9a A C 3a F 9a E 6a Figure 5 The uniform rectangular lamina ACDF shown in Figure 5 has AC = FD = 15a and AF = CD = 3a . The point B on AC is such that AB = 6a . The point E on FD is such that ED = 6a . 3a A F 6a C B 3a 6a E Figure 6 The rectangular lamina is folded along BE to form the folded lamina shown in Figure 6. The folded lamina has AB perpendicular to BC and the two sections, ABEF and BEDC, of the lamina lie in the same plane. (a) Show that the distance of the centre of mass of the folded lamina from EF is 2 5 a . (5)
June 2025 · Paper 4C (Further Mechanics 2) · Q4(b) 1 mark
(b) Explain why the centre of mass of the folded lamina lies on the perpendicular bisector of BE. (1)
June 2025 · Paper 4C (Further Mechanics 2) · Q4(c) 3 marks
The folded lamina is freely suspended from F and hangs in equilibrium. (c) Find the size of the angle between FE and the downward vertical. (3)
June 2025 · Paper 4C (Further Mechanics 2) · Q6(b) 5 marks
The uniform plane template T, shown shaded in Figure 7, is formed from a rectangle and a semicircular ring. The rectangle has AD = BC = 2a and AB = DC = 8a . The midpoint of CD is O. The semicircular ring has centre O, outer radius OD = 4a and inner radius OE = 2a . The template is modelled as a uniform lamina. 2a A E 2a 8a F B 2a C Figure 7 a (b) Show that the distance of the centre of mass of T from DC is ( ) 3 8 + pi (5)
June 2025 · Paper 4C (Further Mechanics 2) · Q6(c) 3 marks
The template is freely suspended from A. The weight of T is W newtons. A horizontal force is applied to T at B so that T is held in equilibrium with AB vertical. The force acts in the same vertical plane as T and has magnitude λW newtons. (c) Find the value of λ (3)
June 2024 · AS Paper 2 (Further Mechanics 2) · Q1(a) 4 marks
1. A 4a B 2a C 4a F E Figure 1 A uniform rod of length 24a is cut into seven pieces which are used to form the framework ABCDEF shown in Figure 1. It is given that • AF = BE = CD = AB = FE = 4a • BC = ED = 2a • the rods AF, BE and CD are parallel • the rods AB, BC, FE and ED are parallel • AF is perpendicular to AB • the rods all lie in the same plane The distance of the centre of mass of the framework from AF is d. = 19 (a) Show that d a (4)
June 2024 · AS Paper 2 (Further Mechanics 2) · Q1(b) 3 marks
(b) Find the distance of the centre of mass of the framework from A. (3)
June 2024 · AS Paper 2 (Further Mechanics 2) · Q4(a) 3 marks
4. A a D E 6a B 3a 2a 6a G F C Figure 3 The uniform triangular lamina ABC has AB perpendicular to AC, AB = 9a and AC = 6a. The point D on AB is such that AD = a. The rectangle DEFG, with DE = 2a and EF = 3a, is removed from the lamina to form the template shown shaded in Figure 3. The distance of the centre of mass of the template from AC is d. = 23 (a) Show that d a (3)
June 2024 · AS Paper 2 (Further Mechanics 2) · Q4(b) 5 marks
The template is freely suspended from A and hangs in equilibrium with AB at an angle theta ° to the downward vertical through A. (b) Find the value of theta (5)
June 2024 · AS Paper 2 (Further Mechanics 2) · Q4(c) 4 marks
A new piece, of exactly the same size and shape as the template, is cut from a lamina of a different uniform material. The template and the new piece are joined together to form the model shown in Figure 4. Both parts of the model lie in the same plane. 6a A a E B 3a 2a 2a G F 6a Q R 3a X T 6a S P a C Figure 4 The weight of CPQRSTA is W The weight of ADGFEBC is 4W The model is freely suspended from A. A horizontal force of magnitude X, acting in the same vertical plane as the model, is now applied to the model at T so that AC is vertical, as shown in Figure 4. (c) Find X in terms of W. (4)
June 2024 · Paper 4C (Further Mechanics 2) · Q2(a) 4 marks
2. 4a B A C 4a E Figure 1 A uniform rod of length 28a is cut into seven identical rods each of length 4a. These rods are joined together to form the rigid framework ABCDEA shown in Figure 1. All seven rods lie in the same plane. The distance of the centre of mass of the framework from ED is d. = 8 3 (a) Show that d a (4)
June 2024 · Paper 4C (Further Mechanics 2) · Q2(b) 3 marks
The weight of the framework is W. The framework is freely pivoted about a horizontal axis through C. The framework is held in equilibrium in a vertical plane, with AC vertical and A below C, by a horizontal force that is applied to the framework at A. The force acts in the same vertical plane as the framework and has magnitude F. (b) Find F in terms of W. (3)
June 2024 · Paper 4C (Further Mechanics 2) · Q4(c) 3 marks
The lamina is freely suspended from A and hangs in equilibrium with OA at angle theta ° to the downward vertical. (c) Find the value of theta (3)
June 2023 · AS Paper 2 (Further Mechanics 2) · Q4(a) 4 marks
4. 18a M A B 6a E 18a 12a C Figure 1 A uniform triangular lamina ABC is isosceles, with AC = BC. The midpoint of AB is M. The length of AB is 18a and the length of CM is 18a. The triangular lamina CDE, with DE = 6a and CD = 12a, has ED parallel to AB and MDC is a straight line. Triangle CDE is removed from triangle ABC to form the lamina L, shown shaded in Figure 1. The distance of the centre of mass of L from MC is d. = 4 (a) Show that d a (4)
June 2023 · AS Paper 2 (Further Mechanics 2) · Q4(b) 3 marks
The lamina L is suspended by two light inextensible strings. One string is attached to L at A and the other string is attached to L at B. The lamina hangs in equilibrium in a vertical plane with the strings vertical and AB horizontal. The weight of L is W (b) Find, in terms of W, the tension in the string attached to L at B (3)
June 2023 · AS Paper 2 (Further Mechanics 2) · Q4(c) 7 marks
The string attached to L at B breaks, so that L is now suspended from A. When L is hanging in equilibrium in a vertical plane, the angle between AB and the downward vertical through A is theta ° (c) Find the value of theta (7)
June 2023 · Paper 4C (Further Mechanics 2) · Q3(a) 2 marks
3. [In this question you may quote, without proof, the formula for the distance of the centre of mass of a uniform circular arc from its centre.] A r r B r C Figure 1 Five pieces of a uniform wire are joined together to form the rigid framework OABCO shown in Figure 1, where • OA, OB and BC are straight, with OA = OB = BC = r • arc AB is one quarter of a circle with centre O and radius r • arc OC is one quarter of a circle of radius r • all five pieces of wire lie in the same plane (a) Show that the centre of mass of arc AB is a distance 2r ; from OA. (2)
June 2023 · Paper 4C (Further Mechanics 2) · Q3(b) 4 marks
Given that the distance of the centre of mass of the framework from OA is d, r (b) show that d ϖ 2 3 (4)
June 2023 · Paper 4C (Further Mechanics 2) · Q3(c) 3 marks
The framework is freely pivoted at A. The framework is held in equilibrium, with AO vertical, by a horizontal force of magnitude F which is applied to the framework at C. Given that the weight of the framework is W (c) find F in terms of W (3)
June 2023 · Paper 4C (Further Mechanics 2) · Q5(b) 3 marks
A light string has one end attached to the lamina at O and the other end attached to the ceiling. A second light string has one end attached to the lamina at A and the other end attached to the ceiling. The lamina hangs in equilibrium with the strings vertical and OA horizontal. The weight of the lamina is W The tension in the string attached to the lamina at A is λW (b) Find the value of λ (3)
June 2022 · AS Paper 2 (Further Mechanics 2) · Q1(a) 5 marks
1. a 3a a A B C F E Figure 1 A uniform plane lamina is in the shape of an isosceles trapezium ABCDEF, as shown shaded in Figure 1. • BCEF is a square • AB = CD = a • BC = 3a (a) Show that the distance of the centre of mass of the lamina from AD is 11 a (5)
June 2022 · AS Paper 2 (Further Mechanics 2) · Q1(b) 2 marks
The mass of the lamina is M The lamina is suspended by two light vertical strings, one attached to the lamina at A and the other attached to the lamina at F The lamina hangs freely in equilibrium, with BF horizontal. (b) Find, in terms of M and g, the tension in the string attached at A (2)
June 2022 · AS Paper 2 (Further Mechanics 2) · Q2(a) 5 marks
2. A B 2a E C a Figure 2 Uniform wire is used to form the framework shown in Figure 2. In the framework • ABCD is a rectangle with AD = 2a and DC = a • BEC is a semicircular arc of radius a and centre O, where O lies on BC The diameter of the semicircle is BC and the point E is such that OE is perpendicular to BC. The points A, B, C, D and E all lie in the same plane. (a) Show that the distance of the centre of mass of the framework from BC is a + pi (5)
June 2022 · AS Paper 2 (Further Mechanics 2) · Q2(b) 4 marks
The framework is freely suspended from A and hangs in equilibrium with AE at an angle theta ° to the downward vertical. (b) Find the value of theta . (4)
June 2022 · AS Paper 2 (Further Mechanics 2) · Q2(c) 3 marks
The mass of the framework is M. A particle of mass kM is attached to the framework at B. The centre of mass of the loaded framework lies on OA. (c) Find the value of k. (3)
June 2022 · Paper 4C (Further Mechanics 2) · Q3(a) 4 marks
3. A 5a 3a 4a F B 5a 5a 3a 3a C 4a 4a E Figure 1 Nine uniform rods are joined together to form the rigid framework ABCDEFA, with AB = BC = DF = 3a, BF = CD = DE = 4a and AF = FE = CF = 5a, as shown in Figure 1. All nine rods lie in the same plane. The mass per unit length of each of the rods BF, CF and DF is twice the mass per unit length of each of the other six rods. (a) Find the distance of the centre of mass of the framework from AC (4)
June 2022 · Paper 4C (Further Mechanics 2) · Q3(b) 3 marks
The mass of the framework is M. A particle of mass kM is attached to the framework at E to form a loaded framework. When the loaded framework is freely suspended from F, it hangs in equilibrium with CE horizontal. (b) Find the exact value of k (3)
June 2022 · Paper 4C (Further Mechanics 2) · Q5(a) 3 marks
5. 3a F E 3a A 3a B 3a C Figure 3 The uniform plane lamina shown in Figure 3 is formed from two squares, ABCO and ODEF, and a sector ODC of a circle with centre O. Both squares have sides of length 3a and AO is perpendicular to OF. The radius of the sector is 3a [In part (a) you may use, without proof, any of the centre of mass formulae given in the formulae booklet.] (a) Show that the distance of the centre of mass of the sector ODC from OC is 4a pi (3)
June 2022 · Paper 4C (Further Mechanics 2) · Q5(b) 4 marks
(b) Find the distance of the centre of mass of the lamina from FC (4)
June 2022 · Paper 4C (Further Mechanics 2) · Q5(c) 4 marks
The lamina is freely suspended from F and hangs in equilibrium with FC at an angle theta ° to the downward vertical. (c) Find the value of theta (4)
Nov 2021 · Paper 4C (Further Mechanics 2) · Q1(a) 6 marks
1. E C 2a B 4a 2a A a Figure 1 A letter P from a shop sign is modelled as a uniform plane lamina which consists of a rectangular lamina, OABDE, joined to a semicircular lamina, BCD, along its diameter BD. OA = ED = a, AB = 2a, OE = 4a, and the diameter BD = 2a, as shown in Figure 1. Using the model, (a) find, in terms of pi and a, the distance of the centre of mass of the letter P, from (i) OE (ii) OA (6)
Nov 2021 · Paper 4C (Further Mechanics 2) · Q1(b) 2 marks
The letter P is freely suspended from O and hangs in equilibrium. The angle between OE and the downward vertical is alpha . Using the model, (b) find the exact value of tan alpha (2)
Oct 2020 · AS Paper 2 (Further Mechanics 2) · Q1(a) 2 marks
1. C a A B 2a Figure 1 Figure 1 shows a uniform rectangular lamina ABCD with AB = 2a and AD = a The mass of the lamina is 6m. A particle of mass 2m is attached to the lamina at A, a particle of mass m is attached to the lamina at B and a particle of mass 3m is attached to the lamina at D, to form a loaded lamina L of total mass 12m. (a) Write down the distance of the centre of mass of L from AB. You must give a reason for your answer. (2)
Oct 2020 · AS Paper 2 (Further Mechanics 2) · Q1(b) 3 marks
a (b) Show that the distance of the centre of mass of L from AD is 2 (3)
Oct 2020 · AS Paper 2 (Further Mechanics 2) · Q1(c) 4 marks
A particle of mass km is now also attached to L at D to form a new loaded lamina N. k + a (c) Show that the distance of the centre of mass of N from AB is ( ) ( k + ) (4)
Oct 2020 · AS Paper 2 (Further Mechanics 2) · Q1(d) 6 marks
When N is freely suspended from A and is hanging in equilibrium, the side AB makes an angle alpha with the vertical, where tan alpha = 3 (d) Find the value of k. (6)
June 2019 · AS Paper 2 (Further Mechanics 2) · Q1(a) 1 mark
1. A B C Figure 1 Five identical uniform rods are joined together to form the rigid framework ABCD shown in Figure 1. Each rod has weight W and length 4a. The points A, B, C and D all lie in the same plane. The centre of mass of the framework is at the point G. (a) Explain why G is the midpoint of AC. (1)
June 2019 · AS Paper 2 (Further Mechanics 2) · Q1(b) 4 marks
The framework is suspended from the ceiling by two vertical light inextensible strings. One string is attached to the framework at A and the other string is attached to the framework at B. The framework hangs freely in equilibrium with AB horizontal. (b) Find (i) the tension in the string attached at A, (ii) the tension in the string attached at B. (4)
June 2019 · AS Paper 2 (Further Mechanics 2) · Q1(c) 4 marks
A particle of weight kW is now attached to the framework at D and a particle of weight 2kW is now attached to the framework at C. The framework remains in equilibrium with AB horizontal and the strings vertical. Either string will break if the tension in it exceeds 6W. (c) Find the greatest possible value of k. (4)
June 2019 · AS Paper 2 (Further Mechanics 2) · Q4(a) 1 mark
4. C 6a 9a 4a B B 3a E E A A 6a F C Triangular lamina Folded lamina Figure 2 9 and The uniform triangular lamina ABCDE is such that angle CEA = 90 , CE ° a 6 . The point D lies on CE, with DE 3 . The point B on CA is such that DB is EA a a 4 . The triangular lamina is folded along the line DB to form the parallel to EA and DB a folded lamina ABDECF, as shown in Figure 2. The distance of the centre of mass of the triangular lamina from DC is d1 The distance of the centre of mass of the folded lamina from DC is d2 (a) Explain why d d (1)
June 2019 · AS Paper 2 (Further Mechanics 2) · Q4(b) 9 marks
The folded lamina is freely suspended from B and hangs in equilibrium with BA inclined at an angle Į to the downward vertical through B. (b) Find, to the nearest degree, the size of angle Į. (9)
June 2018 · AS Paper 2 (Further Mechanics 2) · Q1(a) 4 marks
1. A 13a 12a B 5a C Figure 1 A thin uniform rod, of total length 30a and mass M, is bent to form a frame. The frame is in the shape of a triangle ABC, where AB = 12a, BC = 5a and CA = 13a, as shown in Figure 1. (a) Show that the centre of mass of the frame is 3 2 a from AB. (4)
June 2018 · AS Paper 2 (Further Mechanics 2) · Q1(b) 3 marks
The frame is freely suspended from A. A horizontal force of magnitude kMg, where k is a constant, is applied to the frame at B. The line of action of the force lies in the vertical plane containing the frame. The frame hangs in equilibrium with AB vertical. (b) Find the value of k. (3)
June 2018 · AS Paper 2 (Further Mechanics 2) · Q3(a) 1 mark
3. 2a A B 2a F C a a E Figure 2 The lamina L, shown in Figure 2, consists of a uniform square lamina ABDF and two uniform triangular laminas BDC and FDE. The square has sides of length 2a. The two triangles are identical. The straight lines BDE and FDC are perpendicular with BD = DF = 2a and DC = DE = a. The mass per unit of area of the square is M. The mass per unit area of each triangle is 3M. The centre of mass of L is at the point G. (a) Without doing any calculations, explain why G lies on AD. (1)
June 2018 · AS Paper 2 (Further Mechanics 2) · Q3(b) 7 marks
(b) Show that the distance of G from D is 2 a (7)
June 2018 · AS Paper 2 (Further Mechanics 2) · Q3(c) 3 marks
The lamina L is freely suspended from B and hangs in equilibrium. (c) Find the size of the angle between BE and the downward vertical. (3)

Find an Edexcel Further Maths tutor

Stuck on this? Book a trial lesson with our Further Maths tutor.

Prefer email? Send an enquiry

If you are under 18, please include a parent's contact details. Enquiries go to enquiries@alevelfurthermathstutor.com and are deleted once handled.